Skip to main content

Virtual Host in Bitnami Lampstack

IF you have a website that runs with an IP address and you decide to move it to a domain, then here is the clear step.  Also this post will be helpful to you if you are running a same website by two different IP Address (One in campus and another outside the campus)
Prerequisites:

Your IP Address (Example): 172.16.1.10/site (Internal IP)
Your IP Address (Example): 28.45.34.101/site (External IP)

You want to move it to: example.com (instead of example.com/site)

Step 1:
Open the file /opt/lampstack-5.5.31-0/apache/conf/bitnami/bitnami.conf
In the above file, Change these lines  (The bold lines are the changed ones)

<VirtualHost _default_:80>
DocumentRoot “/opt/lampstack-5.5.31-0/apache2/htdocs/site”
<Directory “/opt/lampstack-5.5.31-0/apache2/htdocs”>
Options Indexes FollowSymLinks
AllowOverride All
<IfVersion < 2.3 >
Order allow,deny
Allow from all
</IfVersion>
<IfVersion >= 2.3 >
Require all granted
</IfVersion>
</Directory>

to
<VirtualHost _default_:80>
DocumentRoot “/opt/lampstack-5.5.31-0/apache2/htdocs/site
ServerName example.com
<Directory “/opt/lampstack-5.5.31-0/apache2/htdocs”>
Options Indexes FollowSymLinks
AllowOverride All
<IfVersion < 2.3 >
Order allow,deny
Allow from all
</IfVersion>
<IfVersion >= 2.3 >
Require all granted
</IfVersion>
</Directory>


Step 2: (Optional)
Open the file using sudo, /etc/hosts and include your IP with the domain name
GNU nano 2.2.6 File: /etc/hosts
127.0.0.1 localhost
127.0.1.1 administrator
172.16.1.10 example.com
28.45.34.101 example.com
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

Once done, restart apache server or the bitnami server by issuing this command
$/opt/lampstack-5.5.31-0] ./ctlscript restart
And now check example.com in the browser, you have done…..

If you manage apache server manually (Other than using bitnami lampstack), then you can edit the httpd-vhosts.conf file with the above steps.

Comments

Post a comment

Popular posts from this blog

Installing TexLive 2019 in Ubuntu 18.04

Installation of TexLive 2019 in Linux (Ubuntu 18.04 LTS)
TeX (Tech)

Installation of TexLive 2019

Please watch the video for full installation



I used .iso file to download, the Total size is 3.3GB for Linux,

and i used the torrent file to download, it took me just 20 min to download the entire .iso file

Extract the .iso file to a folder and open a terminal

$] sudo ./install-tl
(it goes into a terminal mode, which is faster compared to the GUI Mode)

$] sudo ./install-tl -gui
after the installation, set the PATH, MANPATH and INFOPATH as suggested by LATEX

export PATH=$PATH:/usr/local/texlive/2019/bin/x86_64-linux
export MANPATH=/usr/local/texlive/2019/texmf-dist/doc/man
export INFOPATH=/usr/local/texlive/2019/texmf-dist/doc/info

put these lines in to the /home/pradeepkumar/.bashrc

$] gedit /home/pradeepkumar/.bashrc
We have installed TexLive 2019 and texstudio.

To install texstudio

$] sudo apt install texstudio
The look and feel of TexStudio looks like this image.


texlive, it install everyt…

Implementing a new system call in Kernel version 2.6.32

A system call is used by application or user programs to request service from the operating systems. Since the user programs does not have direct access to the kernel whereas the OS has the direct access. OS can access the hardware through system calls only.The following files has to be modified for implementing a system call/usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S/usr/src/linux-2.6.32.5/arch/x86/include/asm/unistd_32.h/usr/src/linux-2.6.32.5/include/linux/syscalls.h/usr/src/linux-2.6.32.5/MakefileNew set of files to be createdCreate a new directory newcall/ inside the path “/usr/src/linux-2.6.32.5/” Create new files Makefile, newcall.c and put them in the /usr/src/linux-2.6.32.5/newcall/ folder Create new user files (in any folder of Linux) to test the system call
testnewcall.c, testnewcall.h (created in /home/pradeepkumar) syscall_table_32.S Find the file /usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S and add the following line at the end
"…

Electrical Machine Design (equations)

FactorsDC Machine Transformers Induction Machines Synchronous MachinesOutput EquationPa=CoD2Ln, where Pa=P/h for generators, Pa=P for motorsFor Single Phase
Q=2.22 f Bm Ai Kw Aw d10-3
For Three Phase
Q=3.33 f Bm Ai Kw Aw d 10-3Q=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * hQ=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * h
For Turbo alternators
Q=1.11Bavac KwsVa2 L 10-3/nsOutput CoefficientCo=Bav ac* 10-3where Bav-magnetic loading and ac - electric loadingDNACo=11 Kws Bav ac 10-3Co=11 Kws Bav ac 10-3 Choice of Magnetic LoadingFlux Density in Teeth Frequency of Flux Reversals Size of machineDNAMagnetizing current, Flux Density, Iron lossIron loss, Stability, Voltage Rating, Parallel Operation, Transient ShortCircuit current Choice of Electric LoadingTemperature rise,
speed of machine, Voltage, Armature reaction, CommutationDNAOverload Capacity, Copper losses, Temperature rise, Leakage ReactanceCopper loss, Synchronous reactance, Temperature rise, Stray Load losses,
Voltage rating Flux …