Skip to main content

AODV simulation in NS2 (Part 1) - NS2 Tutorial # 11

Detailed Explanation of AODV protocol.
Lecture 11 - AODV - Part 1
Todays topic on AODV protocol

AODV - Adhoc Ondemand Distance Vector

the location of the source code for Aodv is in the folder
~ns-2.35/aodv/

My suggestion is
Always try to understand the header file first.. later you can move on to source file (.cc files)

I will go through aodv.h file first and then aodv.cc file next....
let me explain....

I should know where my work is residing, for example in AODV

should I work on

Routing Table
Energy Management
Quality oif Service
Link Failure
Logs or tracing
Neighbour management
Attacks (Black hole, gray hole, etc...)
Security

so prefer to stay at the header files first...



Now the action begins.

how do i modify the AODV protocol as per my small piece of algorithm...

I would like to print the nodes that are forwarding the packets.

Two information will be recorded in a text file separately..

Name of the file: aodv_output.dat
data recorded will be: forwarded packet, node index (node number).

For this, please open the aodv.h and aodv.cc file.
Step 1:
add a variable called as pkt_count as an integer in protected scope inside the aodv.h file.

int pkt_count;

Step 2:
Initialize pkt_count with a value 0 in the aodv.cc file (preferably in the constructor)

pkt_count=0;

Step 3:
Since I am going to get the packet counts in a file, i need to create a file pointer. But first let me get the data in the terminal itself. later i will create it in the file.

Also, only during the forwarding of packets, i am going to get the count, so my code will be running inside the forward() function.
Add the following line to the forward() function of aodv.cc

printf("I am packet no %d and from node number %d\n",pkt_count++,index);

Step 4:
Now recompile ns2 using the command make

$] cd ns-allinone-2.35/ns-2.35/
$] make

Once, there are no errors, your code is compiled successfully....

Then, run any wireless tcl script that has the routing protocol as AODV.
I am running AODV.tcl file that was generated in LEcture number 9.

to run that just
$] ns AODV.tcl
$] nam AODV.nam

I need to get this output in a file called as aodv_output.dat

How to do that... Again the same step open, aodv.cc and aodv.h


Declare a file pointer inside the aodv.h file

FILE *fp;

Initialize this file pointer in aodv.cc constructor

fp = fopen ("aodv_output.dat","w");
include the following line in the forward() function of aodv.cc

fprintf(fp,"I am packet no %d and from node number %d\n",pkt_count++,index);

and run the AODV.tcl file and check for a file called aodv_output.dat is created in the same folder where the AODV.tcl is residing.


Thank you for watching..
To download the codes, visit
https://www.nsnam.com

and share and subscribe to my youtube channel
Youtube.com/tspradeepkumar

Stay Tuned for more lectures...






 
Subscribe to My Youtube Channel - Engineering Clinic

Comments

Popular posts from this blog

Electrical Machine Design (equations)

FactorsDC Machine Transformers Induction Machines Synchronous MachinesOutput EquationPa=CoD2Ln, where Pa=P/h for generators, Pa=P for motorsFor Single Phase
Q=2.22 f Bm Ai Kw Aw d10-3
For Three Phase
Q=3.33 f Bm Ai Kw Aw d 10-3Q=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * hQ=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * h
For Turbo alternators
Q=1.11Bavac KwsVa2 L 10-3/nsOutput CoefficientCo=Bav ac* 10-3where Bav-magnetic loading and ac - electric loadingDNACo=11 Kws Bav ac 10-3Co=11 Kws Bav ac 10-3 Choice of Magnetic LoadingFlux Density in Teeth Frequency of Flux Reversals Size of machineDNAMagnetizing current, Flux Density, Iron lossIron loss, Stability, Voltage Rating, Parallel Operation, Transient ShortCircuit current Choice of Electric LoadingTemperature rise,
speed of machine, Voltage, Armature reaction, CommutationDNAOverload Capacity, Copper losses, Temperature rise, Leakage ReactanceCopper loss, Synchronous reactance, Temperature rise, Stray Load losses,
Voltage rating Flux …

Mannasim Installation in NS2 - NS2 Tutorial # 18

How to Access MOODLE in Intranet and Internet

When Moodle is accessed either in Intranet or internet, there will not be any issue. But occasions when the MOODLE Site has to be accessed both in the intranet and in the Internet, here is a simple trick
Server Used: IBM Blade Servers
Operating system: Windows Server 2008
Moodle Version: 2.4
WAMP Server is used.
Number of Users: 3000 (Students) + 200 (Faculty)
Open the config.php from ~/moodle/config.php
include these lines
$CFG->wwwroot = 'http://'.$server_id.'/vitcc';
$CFG->dataroot  = 'C:\\wamp\\moodledata';
before the following line
$CFG->directorypermissions = 07xx;
Restart the WAMP Server and you can Check MOODLE Site both in Internet and Intranet.

The above Image tells the intranet Link and the internet link can be opened outside the campus network