Skip to main content

How to make boot entry in CentOS for Windows 10

Whenever you try installing Cent OS, after the installation of CentOS, the windows 10  or windows 8 might have gone missing from the boot table entry.
This is due to one of the reasons
  • Since Windows 10 or 8 runs with NTFS filesystem which could not be understandable by Cent OS
  • any other booting issues like UEFI or GPT partition issues.
Any how, one can try the first method to get rid of the NTFS filesystem issue.

After installing CEntOS, get it in to the Cent OS and open the terminal and give the command one by one

$] sudo yum install epel-release
or
$] sudo yum install epel-release.noarch

$] sudo yum install ntfs-3g

Depending on the speed of the internet, the above command might take some time to install.

$] sudo grub2-mkconfig > /dev/null

this command will read the windows 10 or 8 partition. Thats it. Reboot the machine and you can boot in to Windows 10.

Here is the image
CentOS

  and final step is here, execute these commands
$] sudo grub2-mkconfig -o /boot/grub2/grub.cfg

If EFI Mode is enabled, then issue this command

$]  sudo grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg

Comments

Popular posts from this blog

Implementing a new system call in Kernel version 2.6.32

A system call is used by application or user programs to request service from the operating systems. Since the user programs does not have direct access to the kernel whereas the OS has the direct access. OS can access the hardware through system calls only. The following files has to be modified for implementing a system call /usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S /usr/src/linux-2.6.32.5/arch/x86/include/asm/unistd_32.h /usr/src/linux-2.6.32.5/include/linux/syscalls.h /usr/src/linux-2.6.32.5/Makefile New set of files to be created Create a new directory newcall/ inside the path “ /usr/src/linux-2.6.32.5/ ” Create new files Makefile, newcall.c and put them in the /usr/src/linux-2.6.32.5/newcall/ folder Create new user files (in any folder of Linux) to test the system call testnewcall.c, testnewcall.h (created in /home/pradeepkumar ) syscall_table_32.S Find the file /usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_tab

How to Access MOODLE in Intranet and Internet

When Moodle is accessed either in Intranet or internet, there will not be any issue. But occasions when the MOODLE Site has to be accessed both in the intranet and in the Internet, here is a simple trick Server Used: IBM Blade Servers Operating system: Windows Server 2008 Moodle Version: 2.4 WAMP Server is used. Number of Users: 3000 (Students) + 200 (Faculty) Open the config.php from ~/moodle/config.php include these lines $CFG->wwwroot = 'http://'.$server_id.'/vitcc'; $CFG->dataroot  = 'C:\\wamp\\moodledata'; before the following line $CFG->directorypermissions = 07xx; Restart the WAMP Server and you can Check MOODLE Site both in Internet and Intranet. The above Image tells the intranet Link and the internet link can be opened outside the campus network

Electrical Machine Design (equations)

Factors DC Machine Transformers Induction Machines Synchronous Machines Output Equation P a =C o D 2 Ln, where Pa=P/h for generators, Pa=P for motors For Single Phase Q=2.22 f B m A i K w A w d 10 -3 For Three Phase Q=3.33 f B m A i K w A w d 10 -3 Q=C o D 2 L n s KVA Input Q= HP * 0.746 / Cos f * h Q=C o D 2 L n s KVA Input Q= HP * 0.746 / Cos f * h For Turbo alternators Q=1.11B av ac K ws V a 2 L 10 -3 /n s Output Coefficient C o =B av ac* 10 -3 where Bav-magnetic loading and ac - electric loading DNA C o =11 K ws B av ac 10 -3 C o =11 K ws B av ac 10 -3 Choice of Magnetic Loading Flux Density in Teeth Frequency of Flux Reversals Size of machine DNA Magnetizing current, Flux Density, Iron loss Iron loss, Stability, Voltage Rating, Parallel Operation, Transient ShortCircuit current