Skip to main content

Network Simulator 2 workshop

VIT University is conducting gravitas a technical carnival from 16th September 2011 to 18th September 2011. There are so many events scheduled for these days and there are lot a many workshops running in parallel.

Network Simulator 2 workshop is one such event happening on 17th September 2011 at VIT. Please reserve your seat as the seats are limited.

Go to the following url and please make a note of it. The registration fee for the workshop is INR 500 only. So register yourself for the workshop and get the benefits.

The following are the topics covered during the workshop.

Topics for the Session

(Morning Session - 3 hour session)

1. Introduction and installation of Network Simulation 2
2. Wired and Wireless Examples

Afternoon Session (3 hour Session)
1. Recompiling NS2
2. Case Study (Wireless and Wired Examples)

Resource Person

T S Pradeep Kumar

Fee and Duration

Rs. 500 and 6 hours

Comments

  1. I have a problem. I have installed ns2 through Ubuntu Software Center because I couldn't install with Terminal. It was impossible for me
    Now I have to install a patch for RSVP and I don't know how. In all the tutorials I have saw, they go to the folder of ns2 and continue with the installation.

    The problem is that I don't have a ns2 folder, all the files are spread in several folders.
    I don't know what I have to do to install a patch in this case.

    Can somebody help me please?

    Send an email java1652_anva@hotmail.com

    ReplyDelete
  2. sir , I m from nit hamirpur , we want a workshop on ns2 or omnet++ in our college so if possible pls reply

    ReplyDelete
  3. sir ,
    i m frm geu dehradun ,i want u to conduct a workshop on ns2 in our college so kindly reply with ur requirements and structures u need to conduct it.

    ReplyDelete
  4. sir i am the student attended to gravitas11,sir i have a doubt how the ns2 will be useful in real world how can it replace a router?
    i have that confusion sir please reply me i want to do some project on the ns2 please help me sir....

    ReplyDelete
  5. Excuse me, I asked to install NS2 2.34 on Ubuntu 11.04 and setup wireless on NS2

    ReplyDelete

Post a comment

Popular posts from this blog

Installing TexLive 2019 in Ubuntu 18.04

Installation of TexLive 2019 in Linux (Ubuntu 18.04 LTS)
TeX (Tech)

Installation of TexLive 2019

Please watch the video for full installation



I used .iso file to download, the Total size is 3.3GB for Linux,

and i used the torrent file to download, it took me just 20 min to download the entire .iso file

Extract the .iso file to a folder and open a terminal

$] sudo ./install-tl
(it goes into a terminal mode, which is faster compared to the GUI Mode)

$] sudo ./install-tl -gui
after the installation, set the PATH, MANPATH and INFOPATH as suggested by LATEX

export PATH=$PATH:/usr/local/texlive/2019/bin/x86_64-linux
export MANPATH=/usr/local/texlive/2019/texmf-dist/doc/man
export INFOPATH=/usr/local/texlive/2019/texmf-dist/doc/info

put these lines in to the /home/pradeepkumar/.bashrc

$] gedit /home/pradeepkumar/.bashrc
We have installed TexLive 2019 and texstudio.

To install texstudio

$] sudo apt install texstudio
The look and feel of TexStudio looks like this image.


texlive, it install everyt…

Implementing a new system call in Kernel version 2.6.32

A system call is used by application or user programs to request service from the operating systems. Since the user programs does not have direct access to the kernel whereas the OS has the direct access. OS can access the hardware through system calls only.The following files has to be modified for implementing a system call/usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S/usr/src/linux-2.6.32.5/arch/x86/include/asm/unistd_32.h/usr/src/linux-2.6.32.5/include/linux/syscalls.h/usr/src/linux-2.6.32.5/MakefileNew set of files to be createdCreate a new directory newcall/ inside the path “/usr/src/linux-2.6.32.5/” Create new files Makefile, newcall.c and put them in the /usr/src/linux-2.6.32.5/newcall/ folder Create new user files (in any folder of Linux) to test the system call
testnewcall.c, testnewcall.h (created in /home/pradeepkumar) syscall_table_32.S Find the file /usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S and add the following line at the end
"…

Electrical Machine Design (equations)

FactorsDC Machine Transformers Induction Machines Synchronous MachinesOutput EquationPa=CoD2Ln, where Pa=P/h for generators, Pa=P for motorsFor Single Phase
Q=2.22 f Bm Ai Kw Aw d10-3
For Three Phase
Q=3.33 f Bm Ai Kw Aw d 10-3Q=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * hQ=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * h
For Turbo alternators
Q=1.11Bavac KwsVa2 L 10-3/nsOutput CoefficientCo=Bav ac* 10-3where Bav-magnetic loading and ac - electric loadingDNACo=11 Kws Bav ac 10-3Co=11 Kws Bav ac 10-3 Choice of Magnetic LoadingFlux Density in Teeth Frequency of Flux Reversals Size of machineDNAMagnetizing current, Flux Density, Iron lossIron loss, Stability, Voltage Rating, Parallel Operation, Transient ShortCircuit current Choice of Electric LoadingTemperature rise,
speed of machine, Voltage, Armature reaction, CommutationDNAOverload Capacity, Copper losses, Temperature rise, Leakage ReactanceCopper loss, Synchronous reactance, Temperature rise, Stray Load losses,
Voltage rating Flux …