Skip to main content

How to install Fedora along with Windows 7

This post will show you the installation of Fedora along with Windows 7.

This Post is mainly for

  • Beginners of Linux
  • those who entered the college just now
  • who don’t have prior working knowledge on Linux

Here we go….

I have taken DVD Version of Fedora 12 (32 Bit OS)

Step 1: Create a Partition on windows to give space for Fedora, Just 20GB space is enough.. You can store all your files under windows and use it in linux whenever you need. So no extra space needed for Linux. (see the image below)

first

Step 2:  Insert the DVD and boot from the DVD and select the first option (as shown below) “Install or Upgrade an existing System”

DSC02318

Once selected, the system asks you to check the correctness of the media (DVD ROM). if you have doubt with your DVD, please click OK else SKIP it. (see below)

DSC02320

Once done, start proceeding with the installation as given in the following images

Step 4: Select the language (as given below, If you have doubt, leave with the default and click next)

DSC02322

Step 5: Select the Keyboard layout (If you have doubt, leave with the default and click next)

DSC02323

Step 6: Give a name for your Linux OS.

DSC02324

Step 7: Select your locale, I have Selected Asia/Kolkata which is GMT +5 30

DSC02325

Step 8: Select a root (Super User) password (minimum 6 chars)

DSC02326

Step 9:  Now select “Use Free Space” or “Replace Existing Linux system” (See Step 1, we have created a partition in Windows for 20GB which will be used for Linux)
DSC02328

Step 10: Since it is dual OS, then select which OS you like to be the default boot, I made windows 7 as Default OS.

DSC02330

Step 11: Now click “Customize Now” which shows the screen for additional softwares to be installed along with the OS, If you don’t select “customize now”, then only default set of packages will be installed, Later you can install the other package. If you are a developer, then select “Customise Now” and install all the packages that you need. (Please the next couple of images)

DSC02331

Put a “Tick” wherever possible (if you have doubt, select all the software and install the OS).  Once the Components in the left side is selected, in the right hand side a set of softwares will be listed and put a tick to install that software.

DSC02333

Step 12: Depending on the size of RAM and other parameters, the installation will vary from 15 minutes to 45 minutes.

DSC02335

DSC02338

Once done, you will get the following screen and hence Fedora is installed successfully, reboot and take out the DVD and that’s it..

DSC02339

Comments

Popular posts from this blog

Installing TexLive 2019 in Ubuntu 18.04

Installation of TexLive 2019 in Linux (Ubuntu 18.04 LTS)
TeX (Tech)

Installation of TexLive 2019

Please watch the video for full installation



I used .iso file to download, the Total size is 3.3GB for Linux,

and i used the torrent file to download, it took me just 20 min to download the entire .iso file

Extract the .iso file to a folder and open a terminal

$] sudo ./install-tl
(it goes into a terminal mode, which is faster compared to the GUI Mode)

$] sudo ./install-tl -gui
after the installation, set the PATH, MANPATH and INFOPATH as suggested by LATEX

export PATH=$PATH:/usr/local/texlive/2019/bin/x86_64-linux
export MANPATH=/usr/local/texlive/2019/texmf-dist/doc/man
export INFOPATH=/usr/local/texlive/2019/texmf-dist/doc/info

put these lines in to the /home/pradeepkumar/.bashrc

$] gedit /home/pradeepkumar/.bashrc
We have installed TexLive 2019 and texstudio.

To install texstudio

$] sudo apt install texstudio
The look and feel of TexStudio looks like this image.


texlive, it install everyt…

Implementing a new system call in Kernel version 2.6.32

A system call is used by application or user programs to request service from the operating systems. Since the user programs does not have direct access to the kernel whereas the OS has the direct access. OS can access the hardware through system calls only.The following files has to be modified for implementing a system call/usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S/usr/src/linux-2.6.32.5/arch/x86/include/asm/unistd_32.h/usr/src/linux-2.6.32.5/include/linux/syscalls.h/usr/src/linux-2.6.32.5/MakefileNew set of files to be createdCreate a new directory newcall/ inside the path “/usr/src/linux-2.6.32.5/” Create new files Makefile, newcall.c and put them in the /usr/src/linux-2.6.32.5/newcall/ folder Create new user files (in any folder of Linux) to test the system call
testnewcall.c, testnewcall.h (created in /home/pradeepkumar) syscall_table_32.S Find the file /usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S and add the following line at the end
"…

Electrical Machine Design (equations)

FactorsDC Machine Transformers Induction Machines Synchronous MachinesOutput EquationPa=CoD2Ln, where Pa=P/h for generators, Pa=P for motorsFor Single Phase
Q=2.22 f Bm Ai Kw Aw d10-3
For Three Phase
Q=3.33 f Bm Ai Kw Aw d 10-3Q=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * hQ=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * h
For Turbo alternators
Q=1.11Bavac KwsVa2 L 10-3/nsOutput CoefficientCo=Bav ac* 10-3where Bav-magnetic loading and ac - electric loadingDNACo=11 Kws Bav ac 10-3Co=11 Kws Bav ac 10-3 Choice of Magnetic LoadingFlux Density in Teeth Frequency of Flux Reversals Size of machineDNAMagnetizing current, Flux Density, Iron lossIron loss, Stability, Voltage Rating, Parallel Operation, Transient ShortCircuit current Choice of Electric LoadingTemperature rise,
speed of machine, Voltage, Armature reaction, CommutationDNAOverload Capacity, Copper losses, Temperature rise, Leakage ReactanceCopper loss, Synchronous reactance, Temperature rise, Stray Load losses,
Voltage rating Flux …