Skip to main content

checking system version (for dynamic loading)...

If you encounter the following error,  checking system version (for dynamic loading)... ./configure: 1: Syntax error: Unterminated quoted string
then do the following,

Open the following files under ns-allinone-2.xx/

tcl: file tcl8.x.x/unix/tcl.m4
tk: file tk8.x.x/unix/tcl.m4
otcl: file otcl-1.x/configure.in

In all the above files, you can find the following line
system=MP-RAS-`awk ' { print $3 } '/etc/.relid'`

and change the above line to (just remove the last but one single quote, remember that ‘ is different from ` you need to remove only ‘ and not `)

system=MP-RAS-`awk ' { print $3 } '/etc/.relid`

Comments

  1. hi
    i installed ns2.31
    ns2 succesfully installed it gives but
    gives errors for nam like
    nam:
    [code omitted because of length]
    : no event type or button # or keysym
    while executing
    "bind Listbox {
    %W yview scroll [expr {- (%D / 120) * 4}] units
    }"
    invoked from within
    "if {[tk windowingsystem] eq "classic" || [tk windowingsystem] eq "aqua"} {
    bind Listbox {
    %W yview scroll [expr {- (%D)}] units
    }
    bind Li..."
    child process exited abnormally
    plz tell me the solution for this

    ReplyDelete
  2. hi
    i installed ns2.31 in ubuntu 10.04lts

    ns2 succesfully installed it gives but
    gives errors for nam like
    nam:
    [code omitted because of length]
    : no event type or button # or keysym
    while executing
    "bind Listbox {
    %W yview scroll [expr {- (%D / 120) * 4}] units
    }"
    invoked from within
    "if {[tk windowingsystem] eq "classic" || [tk windowingsystem] eq "aqua"} {
    bind Listbox {
    %W yview scroll [expr {- (%D)}] units
    }
    bind Li..."
    child process exited abnormally
    plz tell me the solution for this

    ReplyDelete
  3. i copied 802.16 protocols into the common folder and mac folder and modified the makefile
    then after that i tried to reconfigure using the make clean make install but it gives the following errors can u help me plz



    sabareesh@sabareesh-laptop:~/ns-allinone-2.35-RC3/ns-2.35$ make clean
    Makefile:251: *** commands commence before first target. Stop.

    ReplyDelete
  4. when i ./configure it gives followng error

    configure: error: Installation of tcl seems incomplete or can't be found automatically.
    Please correct the problem by telling configure where tcl is
    using the argument --with-tcl=/path/to/package
    (perhaps after installing it),
    or the package is not required, disable it with --with-tcl=no.

    ReplyDelete

Post a comment

Popular posts from this blog

Installing TexLive 2019 in Ubuntu 18.04

Installation of TexLive 2019 in Linux (Ubuntu 18.04 LTS)
TeX (Tech)

Installation of TexLive 2019

Please watch the video for full installation



I used .iso file to download, the Total size is 3.3GB for Linux,

and i used the torrent file to download, it took me just 20 min to download the entire .iso file

Extract the .iso file to a folder and open a terminal

$] sudo ./install-tl
(it goes into a terminal mode, which is faster compared to the GUI Mode)

$] sudo ./install-tl -gui
after the installation, set the PATH, MANPATH and INFOPATH as suggested by LATEX

export PATH=$PATH:/usr/local/texlive/2019/bin/x86_64-linux
export MANPATH=/usr/local/texlive/2019/texmf-dist/doc/man
export INFOPATH=/usr/local/texlive/2019/texmf-dist/doc/info

put these lines in to the /home/pradeepkumar/.bashrc

$] gedit /home/pradeepkumar/.bashrc
We have installed TexLive 2019 and texstudio.

To install texstudio

$] sudo apt install texstudio
The look and feel of TexStudio looks like this image.


texlive, it install everyt…

Implementing a new system call in Kernel version 2.6.32

A system call is used by application or user programs to request service from the operating systems. Since the user programs does not have direct access to the kernel whereas the OS has the direct access. OS can access the hardware through system calls only.The following files has to be modified for implementing a system call/usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S/usr/src/linux-2.6.32.5/arch/x86/include/asm/unistd_32.h/usr/src/linux-2.6.32.5/include/linux/syscalls.h/usr/src/linux-2.6.32.5/MakefileNew set of files to be createdCreate a new directory newcall/ inside the path “/usr/src/linux-2.6.32.5/” Create new files Makefile, newcall.c and put them in the /usr/src/linux-2.6.32.5/newcall/ folder Create new user files (in any folder of Linux) to test the system call
testnewcall.c, testnewcall.h (created in /home/pradeepkumar) syscall_table_32.S Find the file /usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S and add the following line at the end
"…

Electrical Machine Design (equations)

FactorsDC Machine Transformers Induction Machines Synchronous MachinesOutput EquationPa=CoD2Ln, where Pa=P/h for generators, Pa=P for motorsFor Single Phase
Q=2.22 f Bm Ai Kw Aw d10-3
For Three Phase
Q=3.33 f Bm Ai Kw Aw d 10-3Q=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * hQ=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * h
For Turbo alternators
Q=1.11Bavac KwsVa2 L 10-3/nsOutput CoefficientCo=Bav ac* 10-3where Bav-magnetic loading and ac - electric loadingDNACo=11 Kws Bav ac 10-3Co=11 Kws Bav ac 10-3 Choice of Magnetic LoadingFlux Density in Teeth Frequency of Flux Reversals Size of machineDNAMagnetizing current, Flux Density, Iron lossIron loss, Stability, Voltage Rating, Parallel Operation, Transient ShortCircuit current Choice of Electric LoadingTemperature rise,
speed of machine, Voltage, Armature reaction, CommutationDNAOverload Capacity, Copper losses, Temperature rise, Leakage ReactanceCopper loss, Synchronous reactance, Temperature rise, Stray Load losses,
Voltage rating Flux …