Skip to main content

How to Recompile Network Simulator 2

Assumptions:

  • I have installed my ns-allinone-2.33 under /home/pradeep/ns-allinone-2.33
  • Path is been set in the .bash_profile (which are located at /home/pradeep/) in fedora and .bashrc in ubuntu

There are two ways in which the NS2 can be recompiled

1. You modify the existing algorithm (use the same header and the C++ source files)

2. Adding new files (adding new header and C++ source files)

In first method,

Step 1: open the shell prompt and go to the ns-allinone-2.33/ns-2.33/ folder(there are 3 makefiles, Makefile.vc, Makefile, Makefile.in, for adding any new file should be done at the Makefile.in file)

Step 2: Once the existing algorithm is changed (after modifying the existing header and the C++ source file), go to step 1

Step 3: execute the command, make and press enter, If you have no errors in your modified code, then the compilation will be success, else you may get errors, which needs to be corrected

Step 4: Test your tcl script for the new algorithm

In the second Method,

Step 1: open the shell prompt and go to the /home/pradeep/ns-allinone-2.33/ns-2.33/ folder(there are 3 makefiles namely Makefile.vc, Makefile, Makefile.in, for adding any new file should be done at the Makefile.in file)

Step 2: You may create new header and C++ source files for your new proposed algorithm and hence you need to tell that information to the Makefile.in (which is available in /home/pradeep/ns-allinone-2.33/ns-2.33/). For example, assume i created two files tcpnew.h and tcpnew.cc

Step 3: Put all your files inside a folder (for Example create a new folder tcpnew) and put the tcpnew folder under the folder /home/pradeep/ns-allinone-2.33/ns-2.33/

Step 4: Now open the Makefile.in using any editor (usually vi or gedit) and add the folder information to the OBJ_CC variable)

Step 5: anywhere inside the OBJ_CC variable, put the new folder information like this  tcpnew/tcpnew.o  \

Step 6: after editing the file entry, go to step 1 and execute the command make and press enter. If you have no errors in your modified code, then the compilation will be success, else you may get errors, which needs to be corrected.

Step 7: Test your tcl script for the new Algorithm.

Comments

Popular posts from this blog

Installing TexLive 2019 in Ubuntu 18.04

Installation of TexLive 2019 in Linux (Ubuntu 18.04 LTS)
TeX (Tech)

Installation of TexLive 2019

Please watch the video for full installation



I used .iso file to download, the Total size is 3.3GB for Linux,

and i used the torrent file to download, it took me just 20 min to download the entire .iso file

Extract the .iso file to a folder and open a terminal

$] sudo ./install-tl
(it goes into a terminal mode, which is faster compared to the GUI Mode)

$] sudo ./install-tl -gui
after the installation, set the PATH, MANPATH and INFOPATH as suggested by LATEX

export PATH=$PATH:/usr/local/texlive/2019/bin/x86_64-linux
export MANPATH=/usr/local/texlive/2019/texmf-dist/doc/man
export INFOPATH=/usr/local/texlive/2019/texmf-dist/doc/info

put these lines in to the /home/pradeepkumar/.bashrc

$] gedit /home/pradeepkumar/.bashrc
We have installed TexLive 2019 and texstudio.

To install texstudio

$] sudo apt install texstudio
The look and feel of TexStudio looks like this image.


texlive, it install everyt…

Implementing a new system call in Kernel version 2.6.32

A system call is used by application or user programs to request service from the operating systems. Since the user programs does not have direct access to the kernel whereas the OS has the direct access. OS can access the hardware through system calls only.The following files has to be modified for implementing a system call/usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S/usr/src/linux-2.6.32.5/arch/x86/include/asm/unistd_32.h/usr/src/linux-2.6.32.5/include/linux/syscalls.h/usr/src/linux-2.6.32.5/MakefileNew set of files to be createdCreate a new directory newcall/ inside the path “/usr/src/linux-2.6.32.5/” Create new files Makefile, newcall.c and put them in the /usr/src/linux-2.6.32.5/newcall/ folder Create new user files (in any folder of Linux) to test the system call
testnewcall.c, testnewcall.h (created in /home/pradeepkumar) syscall_table_32.S Find the file /usr/src/linux-2.6.32.5/arch/x86/kernel/syscall_table_32.S and add the following line at the end
"…

Electrical Machine Design (equations)

FactorsDC Machine Transformers Induction Machines Synchronous MachinesOutput EquationPa=CoD2Ln, where Pa=P/h for generators, Pa=P for motorsFor Single Phase
Q=2.22 f Bm Ai Kw Aw d10-3
For Three Phase
Q=3.33 f Bm Ai Kw Aw d 10-3Q=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * hQ=CoD2 L ns
KVA Input Q=
HP * 0.746 / Cos f * h
For Turbo alternators
Q=1.11Bavac KwsVa2 L 10-3/nsOutput CoefficientCo=Bav ac* 10-3where Bav-magnetic loading and ac - electric loadingDNACo=11 Kws Bav ac 10-3Co=11 Kws Bav ac 10-3 Choice of Magnetic LoadingFlux Density in Teeth Frequency of Flux Reversals Size of machineDNAMagnetizing current, Flux Density, Iron lossIron loss, Stability, Voltage Rating, Parallel Operation, Transient ShortCircuit current Choice of Electric LoadingTemperature rise,
speed of machine, Voltage, Armature reaction, CommutationDNAOverload Capacity, Copper losses, Temperature rise, Leakage ReactanceCopper loss, Synchronous reactance, Temperature rise, Stray Load losses,
Voltage rating Flux …